Hioki Phase Detector 3129-10

Non-Metallic Contact 70V to 1000V Phase Detector

Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model 3129-10 is a non-contact phase detector that detects the phase of electrical current flow within insulated wires without the use of metallic contact voltage clips.

• Rotating LED indicator indicates the phase sequence for a 3-phase power supply at a glance
• Intermittent beeps signal positive phase; continuous tone signals reverse phase
• Magnetic base lets you secure the phase detector on a distribution panel
• Simply clip clamps onto wire insulation


<Compatible wires>
IV cable: 14 mm^2 to 500 mm^2, single wire 5 mm to CV cable: 3.5 mm^2 to 500 mm^2

■ Basic specifications

Functions Phase detection (positive and negative)
Voltage detection method Static induction
Voltage range 70 to 1000 V AC (50/60 Hz) (sine wave,continuous input)
Frequency range 45 Hz to 66 Hz
Object to be connected 7 mm (0.28 in) to 40 mm (1.57 in) of insulated wiring
IV, HIV cable: 14 to 500 mm^2
CV cable: 3.5 to 500 mm^2
Display Phase detection : Positive ; 4 LEDs lit in clockwise order and the buzzer sounds intermittently
Negative ; 4 LEDs lit in counterclockwise order and the buzzer sounds continuously
Battery check function Power ON lamp: lights up (Power ON), blinks (Battery LOW)
Auto power off Auto shut off if no activity is detected after power is turned ON for 15 minutes
Power supply R6P (AA) manganese battery ×2, Continuous use: 70 hr
Dimensions and mass 70 mm (2.76 in) W × 75 mm (2.95 in) H × 30 mm (1.18 in) D, 240 g (8.5 oz), Cord length : 0.7 m (2.30 ft)
Accessories Carrying case ×1, Strap ×1, Spiral tube ×1, Instruction manual ×1, R6P (AA) manganese battery ×2

Location

Ask about this product