You have 0 items in your cart.
By Brands
Sub Categories
The PEN-PRO has a measurement range of Brix 0.0 to 85.0% which can be used to measure almost any sample. There are 2 ways to measure with the PEN-PRO. Either dip the tip into the sample and press the START key OR press the START key and touch the tip into the sample. There is also the new feature to perform continuous measurements. The temperature range of the "Dip-Type" Refractometer PEN-PRO has been improved from 60˚C to 100˚C. No more wait ! Measure hot samples while in the cooking process, such as soups and sauces.
CENTER 380 Refrigerant Leakage Detector is the perfect tool for maintaining the air-condition or a cooling system with compressor and Refrigerant. This unit used newly developed semi-conductor sensorwhich is extremely sensitive to variety of general used refrigerant.
Description： INTELLIGENT THERMOMETER Model : YK-2001TM * Type K/J thermometer with "plug and play" function. * Type K (-100 to 1300 oC), Type J (-100 to 1150 oC). * Be plugged with optional "plug & play" probes : YK-200PAL, YK-200PAS, YK-200PAM, YK-200PLX to be a professional Anemometer, Mini Vane Anemometer, Infrared Thermometer, Humidity Meter and Light Meter. * RS-232, Hold, Memory record, oC/oF, 0.1 degree. * Patented.
SD-50, the smoke detector with built-in micro processor, receiving signal from sensor and comparing it with preset alarming value, if it exceeds, transmits the relay output to be connected to PLC/DDC. Usually, the other smoke detectors designed only for fire alarm cannot be used for industrial use because it cannot secure enough accuracy and stability. However, SD-50 accommodating highest accurate ionization sensor and industrial detector technology, secures best accuracy and stability at the same time.
MX100 Style S3 New! 30-ch input module Windows Vista compatible Alarm levels increased from 2 to 4 Multi-Channel Capability, High Isolation Voltage Multi-Interval Measurement Flexible System Configuration Versatile PC-Based Software Options Easy Software Setup No Re-Wiring between Measurements All-in-one "Quick Start Packages" with 10, 20, or 30 Channels
Features : -Operating voltage (DC)：1.5V~150V-Operating Mode : C.C / C.V / C.R / C.P / CC+CV / CR+CV / CP+CV -Parallel Connection of Inputs for Higher Capacity (Max : 9,450W)-Support of High Slew Rate：Max 16A/us-Run Program Function（GO/NO GO Test）-Sequence Function for High Efficient Load Simulations-Commands are compatible with Kikusui PLZ-4W model.-Dynamic(Switching) Function：0.0166Hz ~20kHz-Soft Start Function：Off / On(1~200ms, Res：1ms)-Adjustable OCP / OVP / OPP / UVP Setting -Short Circuit Function-Timer function : Elapsed Time of load on -Cut Off Time(Auto Load Off Timer )：1s to 999h 59min 59s or Off -External Channel Control / Monitoring via Analog Control Connector-Setup Memories：100 sets-3.5 Inch TFT LCD Display-Multi Interface : USB 2.0 Device / Host , RS-232 , GPIB (Optional)
Features * 100MHz Bandwidth, Dual Channel, Delayed Sweep * Built-In 6 digits Universal Counter (GOS-6103C)* 10 Sets Memory for Front Panel Setting Save & Recall (GOS-6103/GOS-6103C)* Time Base Auto-range (GOS-6103/GOS-6103C)* Cursor Readout with 7 Measurements * Panel Setup Lock of Digital-Control Functions * Buzzer Alarm * LED Indicators * TV Synchronization
The 701927 is a 50:1 or 500:1 high voltage (1400V peak) probe with extended bandwidth covering DC to 150MHz, This probe provides a balanced differential input, to be used with oscilloscopes with single-ended inputs (1 MΩ Input Impedance). This probe works with DLM2000, DLM4000, DL6000, DLM6000, DL9000 and SB5000. This probe is conveniently powered by the Yokogawa Probe Interface I/F.