You have 0 items in your cart.
GW Instek
Sub Categories
Stemming from the design and manufacture demands of electronic industries, GW Instek offers diverse...
In addition to provid complete electronic test and measurement instruments, GW Instek...
Features: ※ Easy-Operating Tester, Particularly be Designed for the Digital IC ※ Supported Device：74/54/40/45 Serial, Drive 2xxx ※ Small, Portable, Light and Power-Saving, Usable With Battery ※ Average Search Time: 0.6 Second ※ Display: 16 Characters in 1 Line LCD ※ Test Pins: 14~24 Pins
Features: ※ Automatic level & distortion measurements ※ Auto or Hold function selectable ※ 0.1% ~ 100% in 7 distortion measuring ranges ※ 20Hz ~ 20kHz in 3 continuous ranges ※ 400Hz, 1kHz, 10kHz 3 frequency spots ※ 1mVrms ~ 300Vrms in 12 ACV measuring ranges
Features: ※ 300μV Full Scale Sensitivity ※ Measurement Frequency: 10Hz ~ 1MHz ※ Measurement Amplitude: -70dB ~ +40dB in 12 Ranges ※ Dual Channel (GVT-427B)※ CE Approved (GVT-417B)
Features: ※ Frequency and Period Measurement※ High Resolution at Both High and Low Frequency※ 0.01Hz~2.7GHz Frequency Range(GFC-8270H)※ 0.01Hz~1.3GHz Frequency Range(GFC-8131H)※ 10mV rms High Sensitivity ※ 100nHz Resolution for 1Hz Input ※ Variable Trigger Level Control※ Microprocessor Controlled Intelligent Counter(only GFC-8270H)
Features: ※ 10Hz ~ 120MHz Range ※ 8 Digits Display (0.3"LED) ※ 15mV rms High Sensitivity ※ 5PPM High Stability Time Base ※ Frequency and Period Measurement ※ Low Pass Filter Function ※ Over-Flow Indicatot
Features: ※ Simultaneous Display of W, A, V ( PF or Hz ) ※ True RMS V, A, W ※ Auto Calibration Via Computer ※ Max. / Min. / Hold Function ※ High Immunity to External Noise ※ CT Ratio (1 ~ 9999) ※ PT Ratio (1 ~ 9999)
Features: ※ Combining a Logic Probe and Pulser Combined into One ※ Probe for Troubleshooting Digital Circuits ※ Operating Voltage: 4VDC ~ 18VDC※ Maximum Input Signal Frequency: 50MHz ※ TTL: Logic “1”>3.0V±0.25V, Logic”0”<0.75±0.25V ※ CMOS: Logic “1”>60%VCC±5%, Logic”0”<15%VCC±5% ※ Minimum Detectable Pulse Width: 10nsec ※ Pulser: Sync input impedance 120kΩ ※ Pulse Repetition Rate: Switchable 0.5/400Hz ※ Pulse width: 10μsec ※ Dimensions & Weight: 18(W)x210(H)x18(D)mm, Approx. 50g
Features * Wideband, Upper Resonant Frequency 1GHz* Primary Sensor Type : H-Field* Weight (kg) : 0.25* For : GSP-Series(An addirional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)